12520 Quentin Ave. So.
Savage, MN 55378

The S.U.R.E. List

Below is a list of current S.U.R.E. items (Surplus Used Rental Equipment). RMS Rentals updates this listing monthly, so check back regularly!

#CON18008

JLG 8′ TOWER ATTACHMENT

  • With a 50″ Standard Carriage & 48″ pallet forks
  • Will fit any JLG or Skytrak telehandlers
$4,950
CON18008 Image 2 CON18008 Image 3 CON18008 Image 4 CON18008 Image 5
#CON18007

JLG 8′ TOWER ATTACHMENT

  • With a 50″ Standard Carriage & 48″ pallet forks
  • Side-Tilt
  • Will fit any Lull 844C or Pre-2010 1044C-54 models
$3,950
CON18007 Image 2 CON18007 Image 3 CON18007 Image 4
#CON18006

JLG 8′ TOWER ATTACHMENT

  • Complete with a 50″ Standard Carriage & 48″ Pallet Forks
  • Side-Tilt
  • Fits any Lull 844C or Pre-2010 1044C-54 models
$3,950
CON18006 Image 2 CON18006 Image 3 CON18006 Image 4
#CON17006

ALLEN 12E RAZORBACK 45′ TRUSS SCREED

  • Consignment Unit
$1,800
#036674

ALLEN PS9910 BARREL SPRAYER

  • Honda GX160 5.5 HP Gas Engine
  • Max Flow Rate 9.5 Gal/Min
  • 50′ Hose
$3,145
#023413

ALLEN AR21PBF PROPANE POWER BUGGY

  • Propane Honda GX630 Engine
  • 20 HP
  • 21 Cu Ft
  • 3,200# Payload
  • Electric Start
  • Fuel Capacity – 2.1 GAL
  • Top Speed – 5.9 MPH
  • Weight – 1,405 lbs
$5,450
#002679

ALLEN DHG11HP RAZORBACK GRINDER

  • 11 HP Honda Gas Engine
  • Work Lights & Leveling Ball
  • Electric Start
  • Brand New Grinding Disc
$2,450
#019114

AMT 3994-96 4″ PORTABLE TRASH PUMP

  • Honda GX390 Gas Engine
  • 530 GPM
  • Electric Start
  • Maximum Solids Capacity – 2″
  • 2.5 Hour Run Time
  • Sand Cast Aluminum Housing w/ Cast Iron Wear Parts
  • Hoses Sold Separately
$2,895
#022112

ATLAS COPCO XAS185JD7 AIR COMPRESSOR

  • John Deere Tier 2 Diesel Engine
  • 49 HP
  • Normal Effective Working Pressure – 100 PSI
  • Maximum Unloading Working Pressure – 125 PSI
  • 185 CFM
  • Synthetic Oil
  • Block Heater
  • Heavy Duty Battery
  • 50′ – 3/4 NPT Air Hose
$10,500
022112 Image 2 022112 Image 3 022112 Image 4
#033260

BLAW KNOX PF120H PAVER

  • Model Year 1979
  • John Deere Diesel Engine
  • Trade-In Municipal Unit
  • 10′ w/Strikeoffs
  • 1,174 Hours
$6,500
#033119

CHICAGO PNEUMATIC CP0035 BACKFILL TAMPER

  • 90 PSI at 38.5 CFM
  • 800 Blows/Minute
  • 6-Inch Steel Butt
  • Built-In Muffler
  • Whip Line Included
$950
#019476

CHICAGO PNEUMATIC CP1210 BREAKER, 35#

  • 1,400 Blows Per Minute
  • “T” Handle Design
  • Standard Hex Chuck Size – 1 x 4 1/4
  • Air Inlet – 3/4 NPT
  • Length 21 1/8″
  • Price Does Not Include Bit – Available Upon Request
$495
#022093

CHICAGO PNEUMATIC CP1240 BREAKER, 90#

  • 1,100 Blows Per Minute
  • “T” Handle Design
  • Standard Hex Chuck Size – 1 1/8 x 6
  • Air Inlet – 3/4 NPT
  • Length 29″
  • Price Does Not Include Bit – Available Upon Request
$395
#032460

CHICAGO PNEUMATIC CP4133 CHIPPING HAMMER

  • 18# Class
  • 1,800 Blows per Minute
  • Whip-Line Included
  • .680″ Round
$395
#041230/041231

CUSHION CUT SAW STAND

  • Universal Tile Saw Stand
  • $95/stand OR $160 for both stands
$95
#017345

EDCO DS-18-13H WALK-BEHIND SAW, 18″

  • 13 HP Gas Engine
  • Weight – 254 lb
  • Max Cut Depth – 6 3/4″
  • Water Hose Hook Up
  • Blade NOT Included in Price
  • Ideal for: Concrete or Asphalt Applications, Short-Run Slab Cutting, Contraction Joints, Patch Repairs in Asphalt, Traffic Loop Installation and Trenching
$1,095
#012190

EDCO TG10-11H SINGLE HEAD DISC GRINDER

  • Honda 11 HP Gas Engine
  • 10-inch grinding width
  • 180-lb Operating Weight
  • Grinds 400-500 Sq ft/hr at 1/16″ Depth
  • Rental Grinding Disc Included
$995
#012187

EDCO 2GC-11HP DUAL-HEADED DISC GRINDER

  • Honda 11 HP Gas Engine
  • 22-Inch Grinding Width
  • 282-lb Operating Weight
  • Grinds Approx 400-500sq ft/hour @ 1/32″ Depth
  • Includes (6) Dyma-Sert Grinding Tools, (6) Grinding Stones, (6) Wedges
  • Compare New @ $6,500
$2,250
#025871

EDCO CPM-8-5E ELECTRIC WALK-BEHIND SCARIFIER, 8″

  • 5 HP Electric Motor
  • 230V Single Phase
  • 19.8 Amp Power
  • Weight – 220 lb
  • Will Scarify Approximately 350-500 sq ft/hour at 1/8″ Depth Per Pass
  • Carbides in Great Condition
  • Ideal for: Sidewalk Trip Hazards, Concrete Coating Removal, Floor Clean & Prep, Traffic Line & Markings Removal, Creating Non-Slip Surfaces
$1,950
#009408

EDCO CPU-10FC-20H SELF-PROPELLED SCARIFIER

  • 20 HP Gas Engine
  • 10″ Working Width will Scarify Approx 500-750 Sq Ft per Hour at Depth Per Pass of 1/8″
  • Adjustable Depth Control up to 3/16″ Working Depth Per Pass
  • Ideal For: Parking Deck & Road Repairs, Factory Floor Cleaning and/or Prep, Mall Floor Repairs.
  • Price Includes the Carbides Pictured (Good Condition)
$9,950
009408 Image 2 009408 Image 3 009408 Image 4 009408 Image 5 009408 Image 6
#022822

EDCO CPU-10FC-20H SELF-PROPELLED SCARIFIER

  • 20 HP Gas Engine
  • 10″ Working Width will Scarify Approx 500-750 Sq Ft per Hour at Depth Per Pass of 1/8″
  • Adjustable Depth Control up to 3/16″ Working Depth Per Pass
  • Ideal For: Parking Deck & Road Repairs, Factory Floor Cleaning and/or Prep, Mall Floor Repairs.
  • Price Includes the Carbides Pictured (Good Condition)
$9,950
022822 Image 2 022822 Image 3 022822 Image 4 022822 Image 5 022822 Image 6
#039884

EDCO TRAFFIC LINE REMOVER

  • 11 HP Gas Engine
  • (3) 24 Bit Carbide Assemblies
    • Aggressive Removal of Thermoplastic Lines
    • Removes Paint & Epoxy Traffic Markings
    • Use on Uneven, Rough Asphalt Surfaces
  • 7″ Working Width Will Grind Approx 700-1,000 Lineal Ft/Hr
  • Operating Weight – 438#
$7,335
039884 Image 2 039884 Image 3 039884 Image 4
#031593

GROUSER 8′ TRACK LOADER DOZER BLADE

  • 6-Way Blade
  • 24″ Tall
  • Universal Quick-Tach
$5,995
#020619

JLG 8′ TOWER ATTACHMENT

  • Complete with a 50″ Standard Carriage & 48″ Pallet Forks (NO Side-Tilt)
  • Fits 1044C-54 2012 or Newer Models & All JLG/Skytrak Telehandlers
$4,995
020619 Image 2 020619 Image 3
#006963

JLG 83″ TELEHANDLER GRAPPLE BUCKET

  • Fits only a G5-19A Telehandler
$3,395
#012042

JLG 1930ES SCISSOR LIFT

  • 19-FT Platform Height
  • 25-FT Working Height
  • 30-In Width (Fits Through Doorways)
  • 3-FT Deck Extension
  • 2,685-lb Operating Weight
  • 500-lb Platform Capacity
  • Non-Marking Tires
  • Fresh AMI
  • 150 Hours
$6,450
012042 Image 2 012042 Image 3 012042 Image 4
#328092

JLG 2630ES SCISSOR LIFT

  • 26-Ft Platform Height
  • 31-Ft Working Height
  • 30-In Width
  • 6’4.5″ – Overall Height – Rails Lowered
  • 3-Ft Deck Extension
  • Non-Marking Tires
  • 4,750-lb Operating Weight
  • 500-800-lb Platform Capacity
  • Fresh AMI
  • 163 Hours
$6,450
328092 Image 2 328092 Image 3 328092 Image 4
#021234

JLG 2630ES SCISSOR LIFT

  • 26-Ft Platform Height
  • 31-Ft Working Height
  • 30-In Width
  • 6’4.5″ – Overall Height – Rails Lowered
  • 3-Ft Deck Extension
  • New Non-Marking Tires
  • 4,750-lb Operating Weight
  • 500-800-lb Platform Capacity
  • Fresh AMI
  • 169 Hours
$8,450
#008788

JLG 2646ES SCISSOR LIFT

  • 26-Ft Platform Height
  • 31-Ft Working Height
  • 46-In Width
  • 6’5.5″ – Overall Height – Rails Lowered
  • 50-In Deck Extension
  • Non-Marking Tires
  • 4,975-lb Operating Weight
  • 1000-lb Platform Capacity
  • Fresh AMI
$7,450
008788 Image 2 008788 Image 3 008788 Image 4
#020604

JLG 3246ES SCISSOR LIFT

  • 32-Ft Platform Height
  • 38-Ft Working Height
  • 46-In Width
  • 50-In Deck Extension
  • Non-Marking Tires
  • 4,975-lb Operating Weight
  • 700/1000-lb Platform Capacity
  • Fresh AMI
  • 246 Hours
$12,250
020604 Image 2 020604 Image 3 020604 Image 4 020604 Image 5 020604 Image 6
#037490

MAKITA HM1812X3 ELECTRIC JACKHAMMER, 70#

  • 15 Amp Motor
  • Impact Energy – 53.9 Ft. Lbs.
  • 870 Blows/Minute
  • Vibration Control
  • Cord Length – 16.4′
  • Bit Type: 1-1/8″ Hex
  • Includes Hammer Cart, (2) Chisel Bits & (2) Pointed Bits
$1,895
037490 Image 2 037490 Image 3
#030557

MULTIQUIP MC64SH8 CONCRETE MIXER

  • Honda 7 HP GX240 Gas Engine
  • 6 Cu Ft Steel Drum
  • Manual Dump
  • Recoil Start
  • 2″ Ball Hitch
$2,695
#CON17007

MULTIQUIP STH55JDTCSL RIDE-ON TROWEL, 10′

  • Consignment Unit
  • Includes strap
  • Hydro
  • 867 Hours
$14,995
#041900

MULTIQUIP GB8LED GLOBUG ELECTRIC LIGHT BALLOON

  • 115V
  • 800W
  • LED Lamp
  • Total Lux Up To 100,000 Lumens
  • Up to 40,000 Hours of Operating Life Per Bulb
  • 3-Stage Mast System Up To 13′
  • 48 Lbs
$5,170
041900 Image 2 041900 Image 3
#037675

SOFF-CUT WALK-BEHIND SAW, 18″

  • Honda GX390 Gas Engine
  • 11HP
  • Max Cut Depth – 6 5/8″
  • Will Accept 12″ – 18″ Blade Diameters
  • 1″ Arbor Size
  • Recoil Start
  • Water Tank
  • Operating Weight – 220#
  • Blade NOT included in price
$1,195
037675 Image 2 037675 Image 3
#028612

SOFF-CUT X2500 EARLY ENTRY SAW

  • 11 HP Honda Gas Engine
  • 10″ Blade Guard
  • Max Cut Depth of 1 1/2″
  • Comes with STD Cover Plate & Vacuum Cover Plate (3″ Hose Diameter)
  • New Wheels
  • 117 Hours
$8,950
#037679

SOFF-CUT V1000 VACUUM SYSTEM

  • Honda GXV 11 HP Gas Engine
  • 300 Cu Ft/Minute of Airflow
  • 3 In Hose Diameter
  • 30 Gallon Dust Collection Capacity
  • Operating Weight 525 lbs
  • EPA & OSHA Compliant
$7,750
#024117

TAKEUCHI TB235R MINI-EXCAVATOR

  • Open Rops Canopy
  • Yanmar Tier III Engine (29.8 HP)
  • 7700# Operating Weight
  • 9’5″ Dig Depth
  • Price Includes Quick Coupler, Thumb & Choice of Bucket (Dig or Sand)
  • 30-Day Limited RMS Warranty
$25,900
#028820

TAKEUCHI TW65 LOADER

  • Cab & Air Conditioning
  • 69 HP Deutz Diesel Engine
  • 10,582-lb Operating Weight
  • 3,572-lb Operating Capacity
  • 8,073 Tipping Load
  • 11,600-lb Bucket Breakout Force
  • Includes 77″ Bucket w/Bolt on Blade & 48″ Forks
  • 280 Hours
$59,500
#029686

WACKER PS3-1500 SUBMERSIBLE WATER PUMP, 3″

  • Single Phase 60Hz Motor
  • 110/220V
  • Max Head – 68.9′
  • Max Discharge Capacity – 111 GPM
  • Cable Length – 32′
  • Operating Weight – 63.5#
$1,540
029686 Image 2
#004105

WACKER CRT48-31V-E RIDE-ON TROWEL, 8′ DUAL-FUEL

  • 31 HP Vanguard LP Engine
  • Operating Weigh – 565#
  • Electric Steer
  • (4) Work Lights
  • Lifting Strap & Finish Blades
  • Approx 145 Hours
$8,450
004105 Image 2 004105 Image 3 004105 Image 4 004105 Image 5
#042626

WACKER BS50-2 RAMMER

  • 2-Stroke Gas Engine
  • 715 Blows/Minute
  • Operating Weight – 129#
  • Mixed Oil & Gas
$1,995
042626 Image 2
#028138

WACKER VP1135A VALUE-PLATE COMPACTOR

  • Honda 4-Cylinder Gas Engine
  • Plate Size – 14″ x 20.5″
  • Single Direction
$995
028138 Image 2
#037346

WACKER WP1550AW PLATE COMPACTOR

  • 4-Cycle Single Cylinder Honda Gas Engine
  • One-Directional
  • Weight – 194 lb
  • Plate Size – 19.5″ x 23″
  • Fuel Tank Capacity – 3.9 Gal
  • Water Tank
$1,495
#026275/026276

WACKER M1000 VIBRATORY MOTOR

  • 1.3 HP Motor
  • 115 V
  • Can take shaft length or 3′ to 16.5′
  • Price does NOT include shaft
  • $365/motor OR $670 for both motors
$365
#032870/032871

WACKER M3000 VIBRATORY MOTOR

  • 3.1 HP Motor
  • 115 V
  • Can take shaft length of 3′ to 30′
  • Price does NOT include shaft
  • $625/motor OR $1,175 for both motors
$625
#027320

WACKER IRFU45 HIGH FREQUENCY INTERNAL VIBRATOR

  • High Frequency Induction Motor With Electronic Frequency Motor
  • Head Diamter – 1.8″
  • Head Length – 15″
  • Head Weight – 7.7#
  • Overall Operating Weight – 32.2#
  • Protective Hose Length – 16.4′
  • 120v; 9.6a
  • Frequency: 50-60Hz
$1,355
#475164A

WACKER IRFU57 HIGH FREQUENCY INTERNAL VIBRATOR

  • High Frequency Induction Motor With Electronic Frequency Motor
  • Head Diameter – 2.2″
  • Head Length – 15.8″
  • Head Weight – 12.8#
  • Overall Operating Weight – 43.7#
  • Protective Hose Length – 26′
  • 120v; 12a
  • Frequency 50-60HZ
$695
#013996

WACKER P35A POWER HEAD

  • 4-Cycle Honda Gas Engine
  • Fuel Tank Capacity – 0.68 GAL
  • Operating Weight – 36 lb
  • Price Does NOT Include Board (Boards Are Available For Purchase 8′, 10′, 12′, 14′, 16′)
$695
#028148

WACKER P35A POWER HEAD

  • 4-Cycle Honda Gas Engine
  • Fuel Tank Capacity – 0.68 GAL
  • Operating Weight – 36 lb
  • Price Does NOT Include Board (Boards Are Available For Purchase 8′, 10′, 12′, 14′, 16′)
$695
#036357

WACKER BTS635S CUT-OFF SAW

  • Single-Cylinder 2-Cycle Gas Engine
  • 25# Operating Weight
  • 14″ Blade Guard
  • 1″ Arbor
$895
#027872

WACKER BTS635S CUT-OFF SAW

  • Single-Cylinder 2-Cycle Gas Engine
  • 25# Operating Weight
  • 14″ Blade Guard
  • 1″ Arbor
$895
#475772

WACKER RD15 TANDEM ROLLER

  • Hatz 2-Stroke Diesel Engine
  • 31.5″ Drum Width
  • 2,900-lb Operating Weight
  • Water Tank
  • 296 Hours
$14,900
#028178

WACKER GP6600 GENERATOR

  • Honda GX390 RT2 Gas Engine
  • Electrical Power Max Output – 6,600W
  • Electrical Power Continuous Power – 6,000W
  • (2) 125V 20 Amp Duplex
  • (1) 125V 30 Amp Twist Lock
  • (1) 125V/250V 30 Amp Twist Lock
  • 4.8 Hour Run Time
  • Wheel Kit
$1,895
028178 Image 2 028178 Image 3 028178 Image 4
#031616

WACKER LTN6L LIGHT TOWER

  • 2014 Model, 2900 Hours
  • Kohler Diesel Engine
  • 30′ Mast
  • Engine Block Heater
  • Electronic Fuel Pump
  • 110-Volt and 30-Amp Twist Lock Outlets
$4,950